Whether you call it a pound sign, hashtag, nine-patch, tic-tac-toe or something else, this grid block is an easy one to make. The following instructions are for members of the Knoxville Modern Quilt Guild, as this block is being collected for our next charity quilt, but anyone is free to make it!
KMQG:
Please use this color palette -- solid fabrics and white. You can make the strips white, as I've done here, or reverse the color placement so that the background is white and the strips are one color.
Blocks are due by the meeting on February 15, 2020. Email modknoxville@gmail.com with questions!
The unfinished block should be 13.5 to 14 inches. Do not trim the block to size. Just turn it in as it is, and the volunteer who pieces the top can trim all blocks to a consistent size.
STEPS:
1. Start with a square at least 12.5" and four strips 1.5 x 15."
2. Use a ruler to cut the square into thirds. The cuts can be slightly slanted, but if you're more comfortable with precise, straight lines, feel free to do that instead. (Tip: I tried this block without using a ruler, and it made the strips harder to piece. So grab that ruler and rotary cutter.)
3. Insert two strips into the cuts, and piece the square back together. Press the seams open. With wonky lines, it's a little tricky to get the outside edges of the square aligned again, so take care and do your best. Remember that the block will be oversized, so it's okay if the edges are a little bit off (like mine are!).
4. Use a ruler to cut the square into thirds again, perpendicular to the first two strips. (Again, if you're more comfortable with precise lines, you don't have to make them wonky.)
5. Insert the remaining two strips into the two cuts. Pin and sew them to two sections. Press the seams open.
6. Now you need to sew the three sections back together. If your strips are precise, line up the strip seams on both sections, pin and sew. Press the seams open.
If your strips are wonky, this is the trickiest part of the block because the seams don't line up exactly across the break. Lay the two sections together and eyeball the alignment of the vertical strip so that it doesn't appear to shift to the right or left as it's intersected by the horizontal strip.
Then carefully flip them right sides together (I flip the lower section up so that it's on top). Try to do this flip without shifting the piece to the right or left. Pin to avoid shifting while sewing.
In the photo below, you can see that the vertical seams look pretty well-aligned on either side of the horizontal strip. Check your piece to see if they look aligned before you start sewing. You can also experiment with putting a pin in one seam and trying to line it up with the other seam. Or if you have a trick for getting this part right, let me know!
Sew two sections together, and press the seam open. Then repeat the alignment with the third section. Flip, pin, sew and press the seam open.
7. And there you go! Your block is ready to be trimmed to size (or not, if this is for the KMQG charity quilt).
